Skip to content

Ask which repair will hold up longest for your car: (559) 491-1778

(559) 491-1778

ServicesDent Repair

Dent Repair in Mendota

We take dents out of your car with the method that keeps the panel sound for years. When the paint is unbroken, that usually means paintless repair and your factory finish stays. When it isn't, we repair and refinish so the panel lasts.

Technician kneeling beside a gray car door, working a dent with metal tools under a striped LED panel light in a shop bay with dent rods racked on the wall

The right method depends on the paint

A dent is two problems: the shape of the metal and the condition of the paint over it. If the paint is not cracked or chipped, we can often push the metal back from behind with paintless dent repair. Your car keeps its original factory finish, which is harder, more even and longer lasting than any respray.

If the paint has split, or the metal is stretched or creased too sharply, pushing alone will not hold. Then we work the panel, fill only where needed, and prime and paint it. That costs more up front, but it seals bare metal before rust can start under the surface.

We are I-CAR Platinum certified, and we will tell you plainly which method your dent needs and why, so you are not paying for a respray you don't need or a quick fix that won't last.

What our dent repair covers

Paintless dent removal

We reach behind the panel with shaped rods, or pull from the front with glue tabs, and ease the metal back in small, controlled movements. No filler, no paint, no color matching.

Crease and body line work

Dents across a sharp body line are slower to fix because the line has to come back crisp. We work it in stages and check it under light until it reads straight.

Conventional repair and refinish

When the paint is broken, we straighten the metal, apply a thin skim of filler only where the metal cannot be brought fully level, then prime, paint and clear coat. Our Paint and Refinishing work covers the blending into nearby panels.

Trim and access removal

Getting behind a door or quarter panel often means removing interior trim, tail lamps or inner liners. We take them off carefully and refit them with new clips where the old ones are spent.

Aluminum panels

Aluminum hoods and fenders move differently than steel and resist being pushed back. We use slower techniques and heat where appropriate, and we say so before starting if a panel is better repaired another way.

Silver pickup with a crushed front bumper, crumpled fender and damaged headlight area in a body shop bay beside a red tool cart and masking tape

Signs a dent is worth repairing now

Chipped or cracked paint in the dent
Once bare metal is exposed, moisture can start corrosion under the paint edge. Repairing early keeps the job small.
A dent near an edge or seam
Dents at a door edge or panel seam can stress the paint along the fold. Those spots tend to crack first.
Parking lot dings that keep adding up
Several small dings on one side are often cheaper to fix in one visit than one at a time later.
Planning to sell or trade in
Visible dents lower what a buyer or dealer will offer. Paintless repair is often worth more at resale than it costs, because the original paint stays.
Paint that looks stretched or hazy
A dull or rippled look around a dent can mean the clear coat has been strained. Long summer sun tends to turn that strain into cracks, so an early look is worthwhile.

How a dent repair goes at our shop

  1. 1

    Talk it through by phone

    Describe the panel that took the hit, the size of the dent compared to something familiar like a coin or your palm, and if any paint has cracked or flaked off. From that we can say which repair is likely and book a time for you to bring your car in.

  2. 2

    Inspection under light

    We look at the dent under a reflection board, which shows every ripple. We check the paint, find how to reach the back of the panel, and explain the repair and the estimate before any work starts.

  3. 3

    The repair

    Paintless work happens in one session, often finished while the car is here for part of the day. Repairs that need paint take longer because primer and paint each need time to cure properly.

  4. 4

    Final check and handover

    We inspect the panel again under light, refit any trim, and clean the car. We walk you around the repaired area so you can see it yourself before you leave.

What moves the cost of dent repair

Every dent is priced after we see it, because two dents of the same width can take very different amounts of work. We explain each part of the estimate so you can weigh what you pay now against how the repair will hold up.

Size, depth and sharpness
A shallow, round dent moves easily. A deep dent with a sharp crease has stretched metal and takes far more time.
Location and access
Dents in open door skins are easier to reach than those behind roof rails, braces or double-walled sections. Removing trim or lamps for access adds labor.
Paint condition
Intact paint keeps the job paintless. Broken paint adds prep, primer, color matching and clear coat, and often blending into the next panel.
Panel material
Aluminum and high-strength steel need slower, more careful work than mild steel, which shows in the time on the estimate.

Dent repair questions

Will paintless dent repair damage my paint?
On sound factory paint, it should not. Modern paint flexes as the metal is moved slowly. If paint has been resprayed before, or is already cracked, we will tell you there is a risk before starting.
Can every dent be fixed without painting?
No. Dents with broken paint, very sharp creases or stretched metal usually need conventional repair and refinishing. We would rather tell you that than leave a panel that looks wavy in a year.
Will the dent come back later?
A properly repaired dent does not pop back out. The metal is returned to its shape, not just pushed past it. Repairs with filler stay put too when the filler is applied thin over well-prepared metal.
How long will you need my car?
Small paintless repairs are often done within part of a day. Repairs that need paint usually take a few days so each coat can cure before the next. We will give you a clear timeframe at the inspection.
Is dent repair worth putting through insurance?
Small dings often cost less than a typical deductible, so many drivers pay directly. Larger damage, such as from hail or another vehicle, may be worth a claim. Our Insurance Claims page explains how we work with your insurer.

Let us look at that dent

Tell us what happened and where the dent sits on your car. We will explain the likely approach and set a time for you to bring it to our shop, from Mendota itself or from Firebaugh and Kerman.