Skip to content

Ask which repair will hold up longest for your car: (559) 491-1778

(559) 491-1778

Mendota Auto Collision Shop for Repairs That Age Well

We handle collision repair, dent repair, paint and refinishing, bumper repair and frame straightening at our shop in Mendota. Drivers from Firebaugh and Kerman bring their cars to us for repairs chosen with the next ten years in mind. We explain which fix costs less today and which one costs less over time.

Collision and Body Work, Start to Finish

Most cars that come through our door need more than one kind of work. A rear impact might mean bumper repair, a frame check and a panel refinish all on the same job. We do each of those in-house, so one plan covers the whole car. If an insurance claim is involved, we help you understand the paperwork and keep your adjuster supplied with photos and measurements.

Technician working on a gray sedan with a crushed front corner in a shop bay, new fender and wrapped headlamp on a cart beside it, paint booth behind
  • Collision Repair

    Structural checks, panel repair or replacement, and refinishing after an accident, with each repair choice weighed against how long it will last.

  • Dent Repair

    Paintless dent removal when the factory paint is intact, and careful filling and refinishing when it is not, chosen for how the panel will hold up.

  • Paint and Refinishing

    Color-matched refinishing built on proper prep, so a scratch, faded panel or failing clear coat is fixed once and stays fixed.

  • Bumper Repair

    Cracked, scuffed or pushed-in bumper covers repaired or replaced, refinished to match, with mounts and sensors checked before your car goes home.

  • Frame Straightening

    We measure, pull and re-measure bent unibodies and frames so your car tracks straight, wears tires evenly and protects you the way it was designed to.

  • Insurance Claims

    Help with the repair side of an insurance claim, from the first estimate and teardown to supplements, parts choices and a finished car.

What Moves the Price of a Repair

Two dents that look alike can lead to very different bills. The price depends on what the damage touched, what your car is built from and which repair path you choose. We walk you through each line so you know where the money goes.

We write the estimate after looking at your car, with each part and labor item listed. If teardown reveals more, we show you the photos and update the estimate before the extra work starts.

Damage behind the panel
A crumpled bumper cover may hide a broken absorber, bent reinforcement bar or damaged sensor. We often find these only after teardown, and we document them before anything changes on the estimate.
Materials your car uses
Aluminum panels, high-strength steel and plastic bumper covers each repair differently. Some can be straightened, while others must be replaced by the maker's procedures.
Parts choice
New original parts, quality aftermarket parts and repairing what you have all carry different prices and different lifespans. We tell you how each one tends to fit and wear.
Paint and blending
Matching a tri-coat or pearl color takes more material and more panels blended than a solid color. Proper blending is what keeps the repair from showing as the paint ages.
Sensors and calibration
Cameras and radar in bumpers and windshields may need calibration after a repair. Skipping it keeps the bill lower but can leave safety features reading wrong.
Two workers push a gray sedan at the open door of an auto body shop, with a paint booth, tool chest, lifted truck and bumper cover inside

About Our Shop

Auto Collision Shop Mendota is a body shop built around one idea: the cheapest repair today is not always the cheapest repair. We would rather spend ten minutes explaining why a replaced bracket beats a straightened one than see your car back with a rattle in a year.

Our work happens inside our own shop, with the car in our hands from teardown to final polish. Long summer heat in the valley is hard on paint and plastic trim, so we pay close attention to clear coat thickness and cure times. That care is what lets a finish keep its gloss instead of chalking early.

Certifications
I-CAR Platinum certified
Silver pickup with a crushed front bumper, crumpled fender and damaged headlight area in a body shop bay beside a red tool cart and masking tape

How We Work on Your Car

A repair can look right the day you pick it up and still fail early. We make our choices for the years after that.

Trained to current repair methods
Our shop is I-CAR Platinum certified. Modern cars mix high-strength steels, aluminum and panels joined with structural adhesives, and each needs its own handling. That training is how we keep up with them.
Two options, both explained
When a part could be repaired or replaced, we show you both. You hear what each costs now, how long each is likely to last and what upkeep it might need. Then you decide.
Finish work done in the right order
Primer, sealer, base coat and clear each get their full cure time. Rushing a step saves a day and costs you a finish that fades, peels or shows sanding marks within a few summers.
Hidden damage shown, not described
Once panels come off, we photograph what we find behind them, from cracked brackets to kinked rails. You see the same pictures your insurer sees.
Corrosion protection put back
Repair work strips away factory coatings. We restore seam sealer and cavity protection on repaired areas so rust has no easy place to start.

Drivers We Serve Around Mendota

Our shop is in Mendota, and we see cars from across the west side of the valley. Drivers come in from Firebaugh, Kerman, San Joaquin and Dos Palos, and from Madera, Madera Acres, Parksdale and Chowchilla to the east. Farm roads, gravel and long highway miles all leave their mark, and we repair what they leave behind.

  • Mendota
  • Firebaugh
  • Kerman
  • San Joaquin
  • Madera
  • Dos Palos
  • Chowchilla
  • Madera Acres
  • Parksdale

All work is done at our shop, so plan on bringing your car to us. Give us a call and we will set a drop-off time that fits your drive.

Small cinderblock auto body shop with open bay and a bumper on a stand, a silver sedan and white van parked at the curb on an overcast street

How a Repair Moves Through Our Shop

Most jobs follow the same path. Here is what to expect from your first call to the day you drive away.

  1. 1

    Phone call and drop-off

    Tell us what happened and set a time to bring your car in. If there is an insurance claim, have your claim number handy.

  2. 2

    Inspection and estimate

    We look the car over, measure where needed and write up the estimate. We go over the repair options with you and note which ones hold up longer.

  3. 3

    Teardown and approval

    We remove damaged parts to check what sits underneath. Anything new gets photographed and approved by you, and by your insurer if a claim is open, before we continue.

  4. 4

    Structure, body and paint

    Frame and structural work comes first, then panels, then refinishing in a controlled booth. Each coat cures fully before the next.

  5. 5

    Final check and pickup

    We check panel gaps, color match, lights and any calibrated systems. When you pick up, we walk you around the car and point out what was done.

Questions Drivers Ask Us

My insurer suggested a body shop. Can I pick a different one?
Yes. California law leaves the choice of repair shop with you, even when your insurer offers a list of its own. We work with any insurance company and supply the photos and estimate the adjuster needs to move the claim along.
Will you use new or aftermarket parts?
That depends on the part, your policy and what you prefer. We lay out what each option costs and how well it usually fits and lasts. For structural and safety parts, we follow the maker's repair procedures.
Is it safe to keep driving my car before the repair?
Sometimes, but not always. Loose trim, a cracked light or a bumper rubbing a tire can turn a small problem into a bigger one, and hidden structural damage can change how the car handles. Describe the damage when you call and we will tell you whether it is better to bring it in sooner.
Why did my estimate change after you started?
Some damage only shows once the outer panels are off, such as a cracked mount or a bent reinforcement. When that happens we photograph it, explain it and update the estimate before doing more work. Nothing extra goes ahead without your approval.
Should I repair a small dent or leave it?
A dent with unbroken paint can often wait, but one with chipped or cracked paint lets moisture reach bare metal. Over time that can turn into rust that costs far more to fix. We can look at it and tell you plainly which kind you have.
What decides how many days my car stays with you?
The size of the job sets most of it, along with how quickly parts arrive and when the insurer signs off. A scuffed bumper cover or a single dent is usually a short stay, while structural straightening and a multi-panel refinish need more days. We share an expected ready date when you drop the car off, and we call you if parts or approvals push it back.
Does my car need calibration after body work?
If your car has cameras or radar in the bumper, mirrors or windshield, a repair in those areas often means the sensors need recalibrating. We check for this on every estimate and explain why it matters for lane-keeping and automatic braking.
Do you stand behind your paint work?
Yes. All of our paint work comes with a lifetime warranty. If you have a question about a finish we applied, call us and we will take a look.

Plan a Repair That Holds Up

Tell us what happened to your car and we will talk through the options, what each costs now and how each will wear over the years.