Skip to content

Ask which repair will hold up longest for your car: (559) 491-1778

(559) 491-1778

ServicesCollision Repair

Collision Repair in Mendota

After an accident, we bring your car back to sound structure, correct panel gaps and a finish that matches the factory paint. Each repair choice is laid out in writing so you can weigh what it costs now against how well it will hold up.

Technician working on a gray sedan with a crushed front corner in a shop bay, new fender and wrapped headlamp on a cart beside it, paint booth behind

What collision repair covers and when you need it

Collision repair is the work that follows a real impact: a front-end hit, a side swipe in a parking lot, a rear-end at a stop. It usually reaches past the visible panel to the brackets, reinforcements, sensors and crush zones behind it. If the damage stops at one shallow ding, our dent repair page is the better fit. If the car took a hit hard enough to move a door gap or set off a warning light, this is the right place to start.

Some fixes look fine on the day you pick up your car and start to fail a year later. Filler laid over a stretched panel can crack. A clip that was reused instead of replaced can rattle loose. We would rather show you both options and their likely lifespan, then let you decide. Sometimes the cheaper repair is the sensible one. Often a new part costs less over the life of the vehicle than a patch you end up redoing.

What the work includes

Teardown and hidden damage check
We remove the bumper cover, trim and lights around the impact so we can see what the outside hides. Bent supports, cracked mounts and kinked rails show up here, before the estimate is final.
Structural measurement
We measure the body against factory dimensions. If anything is out of spec, the vehicle moves to our frame straightening work before any panel goes back on.
Repair or replace, panel by panel
Each damaged part gets an honest call. We repair metal that can return to its original shape and strength, and we replace parts that cannot, explaining why in plain terms.
Paint matched to your car
Refinishing is done to match the color and texture of the panels around it, with blending into neighboring panels where the eye would catch a difference. Our paint and refinishing page covers that process in more depth.
Reassembly and systems check
Lights, sensors, clips and seals go back in properly, and we confirm that warning lights and safety systems behave as they should before you drive away.

Signs your car needs more than a quick fix

  • Door or hood gaps look uneven

    A gap that is wider at one end than the other usually means something behind the panel shifted. That is a structural question, not a cosmetic one.

  • A door, trunk or hood closes differently

    If you have to slam a door that used to shut softly, the opening has likely moved out of shape.

  • New warning lights after the impact

    Parking sensors, airbag lights and driver-assist alerts often sit right where bumpers take a hit. A light that came on after the accident needs checking.

  • The car pulls or the steering wheel sits off center

    Even a slow-speed curb strike or side impact can push suspension and mounting points out of place. On long straight valley roads you will feel the pull quickly.

  • Cracked paint around the damaged area

    Spider cracks or flaking near a dent mean the panel flexed further than it looks. Left alone, bare metal underneath can start to corrode.

How a collision repair runs at our shop

  1. 1

    Your call and first look

    You describe what happened by phone and we set a time for you to bring your car in. We walk around it with you and note what you have noticed while driving.

  2. 2

    A written estimate

    You get a line-item estimate that separates repair from replacement and shows where we chose new parts and why. If teardown later uncovers more, we photograph it and talk with you before adding anything.

  3. 3

    Structure first, then panels

    We correct any structural issues, then fit and align body panels so gaps are even and doors close the way they did before.

  4. 4

    Refinish and reassemble

    Panels are primed, painted and cured, then lights, trim and sensors go back on. We check fit and function together rather than one at a time.

  5. 5

    Final walk-through

    Before you take your car back, we go over the work with you in good light, show you what was replaced and point out anything worth watching.

Silver pickup with a crushed front bumper, crumpled fender and damaged headlight area in a body shop bay beside a red tool cart and masking tape

What shapes the cost of collision repair

No two accidents leave the same damage, so the price depends on what we find once the outer panels come off. We look at the cost today next to how long each fix will last, and we put both in writing. As an I-CAR Platinum certified shop, we follow current repair procedures for each make, and those procedures also shape which parts and steps a repair needs.

Hidden structural damage
Damage to rails, pillars or mounts adds measuring and straightening time. It is also the part of the repair that most affects how your car handles a future impact.
Parts choice
New factory parts, quality aftermarket parts and repaired originals differ in price and in fit. We explain the tradeoff for each so you can choose what makes sense for how long you plan to keep the car.
Sensors and electronics
Bumpers and mirrors on newer vehicles carry cameras and radar units. Replacing or recalibrating them adds to the cost but keeps those systems working correctly.
Paint and blending
Tri-coat colors, pearls and metallics take more material and time to match. Blending into adjacent panels adds labor and gives a finish that does not stand out.

Collision repair questions

Something not covered here? (559) 491-1778

Should my car be towed in, or is it okay to drive it over?

A car that tracks straight, has working lights and has nothing scraping against a tire can usually make the trip if you take it slowly. A lit warning light, a wheel sitting at an odd angle or a puddle forming underneath are reasons to have it towed. Driving with suspension knocked out of line can turn a smaller repair into a larger one.

Will the estimate change once you take the car apart?

It can, because some damage only shows after the bumper and trim come off. When that happens we photograph what we found, explain it and talk with you before doing the added work. Nothing is added quietly.

Do I have to go through my insurance?

No. You can pay for the repair yourself or file a claim. Our insurance claims page explains how the claim side works and how we share photos and estimates with an adjuster, though the adjuster still makes the coverage decisions.

Should I repair or replace a damaged panel?

It depends on how far the metal stretched and what the panel does structurally. A repaired panel can be every bit as good when the metal returns to shape cleanly. When it cannot, a new part avoids filler that may crack later, and we will tell you which case you are in.

Do you work on cars from outside Mendota?

Yes. Drivers bring vehicles in from Firebaugh, Kerman, Dos Palos and other towns nearby, and the process is the same for everyone.

Get a clear plan for your car

Tell us what happened and what you have noticed since. We will set a time to look over your vehicle and walk you through the repair choices in writing.